MRA 4025066156252 Instructions De Montage page 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
4 Plastic screen panels, 12 x 5 mm
4 Oval head screws, M5 x 25 mm
4 Spacers, 6 mm
4 O-rings, black, 4.5 x 1.5 mm
How to mount the screen on your motorbike:
1. Stand your motorbike up on a level surface.
2. Dismantle the original screen.
3. Insert the M5 x 25 mm oval head screws and plastic washers included
through the MRA screen. After that, place the 6 mm spacers and O-rings
onto the screws from inside (P1).
4. Now mount the MRA screen onto the fairing of your bike by aligning the
MRA screen to the bike's midline, and tighten up the screws.
5. Mount the edge protector strip; slide the end sleeves over the ends of the
edge protector strip and gently crimp the sleeves with a pair of pliers to
secure it (P2).
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
Honda NC750X 2016-
Article No..
--- Allen keys, 3 and 6 mm
10635
10641
11038
10992
3
Required tools