Authorized Service Procedures; Replacement Kits And Recommended Tools - L-Acoustics KARA Manuel D'utilisation

® ® ® ®
KARA KARA KARA KARA
M M M M O O O O DULAR DULAR DULAR DULAR WST
user manual user manual user manual user manual
VERSION 1.3
8.3

Authorized service procedures

8.3.1

Replacement kits and recommended tools

The replacement kits (KR) available for the customer are shown in Figure 15 and listed in Table 6 with reference to the
corresponding service procedures. Table 7 is a list of all tools and material needed for KARA service (not included).
Service and repair work for any other part must be carried out by an L-ACOUSTICS
representative. Otherwise, the customer may be exposed to dangerous situations and the warranty will
no longer apply.
WARNING
KR KARAGR
KR TISSU
Reference
KR KARAGR Complete front face
KR TISSU HF protection fabric
KR KARAPR Protective elements
KR HPPH85 LF transducer
KR HPBC34 HF transducer
KR HSBC34 HF diaphragm
KR KARACNT Connector plate
KR PIN621 5/16" R-BLP (round-shaped ball-locking pin)
KR LOCKBLUE Medium-strength thread-locker
KR PAINT8019 Grey brown RAL 8019
Electric screwdriver with torque selector (N.m or in.lb
Sine wave generator
KARA_UM_ML_1-3
® ® ® ®
WST WST WST LINE SOURCE LINE SOURCE LINE SOURCE LINE SOURCE
KR HPPH85
KR PIN621
Figure 15: KARA exploded view
Table 6: Replacement kits and utilities
Kit description
®
paint
Table 7: Recommended tools and material
w w w . l - a c o u s t i c s . c o m
KR KARAPR
KR HPBC34 KR HSBC34
Kit contents
(fixing material included)
2 complete grills and one HF
protection fabric
1 fabric
4 pieces
1 complete transducer
1 complete transducer
1 diaphragm
1 complete plate
10 pins
5 pipettes of 50 g
1 can of 12 kg
) 3 mm hex bit
f
4 mm hex bit
5 mm hex bit
®
authorized
KR KARACNT
Service procedure
[8.3.2]
[8.3.2]
[8.3.3]
[8.3.4]
[8.3.5]
[8.3.6]
[8.3.7]
—
—
—
13 mm hex socket key
®
T30 Torx bit
2-sided tape
20 en 20 20 20