Operation; System Configuration - L-Acoustics 115XTHiQ Manuel D'utilisation

115XT HiQ 115XT HiQ
115XT HiQ 115XT HiQ
COAXIAL STAGE MONITOR COAXIAL STAGE MONITOR COAXIAL STAGE MONITOR COAXIAL STAGE MONITOR
user manual user manual
user manual user manual
VERSION 1.4
7 7 7 7

OPERATION

OPERATION OPERATION OPERATION
7.1

System configuration

The choice of a system configuration should be the result of an electro-acoustic study conducted by an expert (System
Engineer or Audio Consultant). However, this will not be discussed here as sound-design aspects are beyond the scope
of this manual. This study can rely on the simulations modeled in SOUNDVISION software, yielding electro-acoustic
predictions which take into account the enclosures' manufacturer data and particular situational usage, as well as the
projected environment.
Two operation modes ("FULL RANGE" and "HIGH-PASS"), each one associated with a set of factory presets, will
allow building all the common configurations (C, LR, LCR, distributed...).
The 115XT HiQ enclosures can be used as a standalone system in the "FULL RANGE'' mode or in combination with
subwoofers in the "HIGH-PASS'' mode.
For each mode a distinction is drawn between ''FRONT'', ''FILL'', and ''MONITOR'' presets as they respectively
match front-of-house, distributed, and half-space loading applications.
!
The MONITOR presets have been optimized from the 1.3 to the 2.0 preset library versions.
IMPORTANT
!
ALWAYS check that the 115XT HiQ enclosures are connected to correct LA8 output channels
before operating.
IMPORTANT
Note: The latest version of the preset library can be supplied by an L-ACOUSTICS
also downloadable on the L-ACOUSTICS
HiQ_UM_ML_1-4
®
web site at www.l-acoustics.com.
w w w . l - a c o u s t i c s . c o m
®
authorized representative and is
12 en 12
12 12