Operation; System Configuration - L-Acoustics XTi Série Manuel D'utilisation

7 7 7 7

OPERATION

OPERATION
OPERATION OPERATION
7.1

System configuration

The choice of a system configuration should be the result of an electro-acoustic study conducted by an expert (System
Engineer or Audio Consultant). However, this will not be discussed here as sound-design aspects are beyond the scope
of this manual. This study can rely on the simulations modeled in SOUNDVISION software, yielding electro-acoustic
predictions which take into account the enclosures' manufacturer data and particular situational usage, as well as the
projected environment.
Three operation modes ("FULL RANGE", "HIGH-PASS", and "LOW-EXTENSION"), each one associated with a set of
factory presets, will allow building all the common configurations (C, LR, LCR, distributed...).
The 12XTi enclosures can be used as a standalone system in the "FULL RANGE'' mode or in combination with
subwoofers in the "HIGH-PASS'' and "LOW-EXTENSION'' modes.
For each mode a distinction is drawn between ''FRONT'', ''FILL'', and ''MONITOR'' presets as they respectively
match front-of-house, distributed, and half-space loading applications.
• The LA4 / LA4X output channel assignment varies with the preset selected by the user.
!
• ALWAYS check that the 12XTi enclosures are connected to correct LA4 / LA4X output channels
before operating.
CAUTION
Note: The latest version of the preset library can be supplied by an L-ACOUSTICS
also downloadable from the L-ACOUSTICS
12XTI_UM_ML_1-1
®
web site at www.l-acoustics.com.
w w w . l - a c o u s t i c s . c o m
®
authorized representative and is
EN
11 en 11
11 11