Accessoires; Accessories; Reprocessing Methods - MICRO MEGA STATIS SL 101.1 Manuel De L'opérateur

1 Important Information
Do not use vinegar to clean the spray nozzles.
If the turbine is to remain unused for an extended period of time, it must be cleaned and lubricated in accordance with the instructions
and stored in a dry place. Stop using the turbine if it becomes damaged or overheats, if it makes an abnormal sound during use, if there
is excessive vibration, if the drill becomes excessively out-of-round or does not fit properly. To avoid any further damage, contact the
®
MICRO-MEGA customer services department or your approved MICRO-MEGA

2 Accessoires

2

Accessories

Lubricating:
Oil spray «500I»
Spray nozzle

3 Reprocessing Methods

3 Reprocessing Methods
Reprocessing limitations
The sterilisation process does not affect the performance of dynamic instruments. The product's life span normally depends on
•
damage incurred during use.
Place of use
After use, remove the excess debris with a disinfectant wipe.
•
Containment and transport
It is advisable to reprocess the turbine as soon as possible after use or to immerse it in water to prevent debris from drying and to
•
prevent blood and saliva from coagulating.
Page 22
®
stockist.
Ref :
50700008
50700032
MICRO-MEGA
®
- STATIS