General Power Tool Safety Warnings - Güde HST 18-0 Traduction Du Mode D'emploi D'origine

ENGLISH
18
has to be fitted with a first-aid kit. It is essential to
replace any used material in the first-aid kit immedia-
tely after it has been used.
If you seek help, state the following pieces of infor-
mation:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Symbols
Caution!
Read the Operating Instructions!
Wear eye protection !
Wear ear protectors!
Wear protective helmet !
Wear protective gloves !
Take out the battery before cleaning or
adjusting the appliance or leaving the
applinace unsupervised for a while.
Do not use the charger when the electric
cable is damaged.
Warning against thrown-off items
Keep distance of persons
Observe to keep out of dangerous zone
Warning against cutting injuries
Electrical hazard , keep at least 10 m
distance away from electrical power lines.
Protect against humidity
Never expose tool to rain.
Akkulagerung bei max. bei 40°C. Nicht in
Flüssigkeiten eintauchen. Vor Flammen
und Feuer fernhalten.Akkulagerung bei
max. bei 40°C.
Storage temperature
Protect against moisture
Battery to be stored fully charged only.
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against moisture
This side up

General Power Tool Safety Warnings

WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to your
mains-operated (cordepower tool or battery-opera-
ted (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while opera-
ting a power tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (groundepower
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and refri-
gerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase