EN
NL
3.5
Battery switch
Your wheelchair is equipped with a battery switch (16) to interrupt the circuit between the power
module and batteries. The disconnection is used for safety during transport, maintenance and
repairs. It is also possible to remove the battery switch knob to prevent that the wheelchair is
moved during your absence.
C
Battery connected
Operation:
Turn the red battery switch (16)
• clockwise to "I" to connect the battery to the power module [C].
• anticlockwise to "0" to disconnect the battery [D].
• anticlockwise, passing "0" to its end position [E] and remove the knob from the switch.
3.6
Moving to/from wheelchair
CAUTION
• In case you cannot perform the transfer in a safe manner, ask someone to assist you.
• Do not stand on the footplate(s) during transfer into or out of the wheelchair.
A
Braking position
Operating free-wheel lever
D
Battery disconnected
Battery switch positions
Risk of injuries or damage
B
Free-wheel position
E
Disconnector end position
14
Sigma, Sigma 230
2021-01
Using your wheelchair