Vermeiren Sigma Manuel D'utilisation page 21

3.7.5 Footplate of B06
Angle
To change the angle of the footplate (5):
1. Loosen star knob (34) of toothed clamp (33) a few turns.
2. Turn the footplate up/down and hold it in desired position.
3. Tighten star knob (34).
4. Repeat this for the second footplate.
5. Make sure that both footplates are firmly secured.
3.7.6 Footplate of BZ10E
Fold the footplate (5) up to make room for passage.
3.7.7 Leg rests BZ7-BZ8
1. Loosen the lever (13) at the rotation point.
2. Adjust the angle of the leg rest by lifting/lowering the
footplates (between 100° - 190°).
3. Retighten the lever (13) firmly by hand.
4. Repeat this for the second leg rest. Make sure that
both leg rests are firmly secured.
3.7.8 Headrest L58 (if applicable)
To mount:
1. Loosen the star knob (35).
2. Mount the square tube of the headrest (36) into the
provided bracket (37).
3. Retighten the star knob (35) firmly by hand.
To remove, repeat the steps above in reverse order.
To adjust the height/depth
1. Loosen the levers (38).
2. Put the headrest into the desired position.
3. Retighten the levers (38) properly by hand.
13
38
35
17
Sigma, Sigma 230
2021-01
Using your wheelchair
33
34
5
36
37
EN
NL
5