Instructions For Maintenance; Wheels And Tyres; Troubleshooting - Vermeiren Sigma Manuel D'utilisation

Masquer les pouces Voir aussi pour Sigma:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
EN
NL
4.2

Instructions for maintenance

4.2.1 Wheels and tyres

Proper working of the brakes depends on the state of the tyres, that can change due to wear
and contamination (water, oil, mud, ...).
• Keep your wheels free of wires, hair, sand and fibres.
• Check the profile of the tyres. If the tread depth is less than 1 mm, the tyres need to be replaced.
Contact your specialist dealer for this matter.
• Inflate the pneumatic tyres to the correct pressure (see pressure indication on the tyres).
• For instructions on how to change the tyres, see the installation manual.
4.2.2 Cleaning
CAUTION
• Keep the operating console clean and protect it from water and rain.
• Never use a hose or high-pressure cleaner to clean the wheelchair.
Wipe all rigid parts of the wheelchair with a damp cloth (not drenched). If necessary, use a mild
soap, suitable for varnishes and synthetics.
The upholstery can be cleaned with lukewarm water and a mild soap. Do not use abrasive
cleaning agents to clean.
Keep the ventilation openings of the battery charger clean and free of accumulated dust. Blow
away the dust and clean the battery charger enclosure with a slightly moistened cloth, if required.
4.2.3 Disinfection
CAUTION
Disinfections may only be undertaken by trained persons. Consult your specialist dealer.
4.3

Troubleshooting

Even if you use your wheelchair properly, a technical problem may occur despite this.
In this case, contact your local specialist dealer.
WARNING
• NEVER attempt to repair your wheelchair yourself.
• For failures in the operating console you need to contact your specialist dealer.
He/She will decide if the console needs to be reprogrammed.
In case of failure, a fault code is displayed on the operating console.
For an overview of all fault codes on the operating console, please read the manual of the
operating console.
The following symptoms may indicate a serious problem. Therefore, always contact your
specialist dealer if you spot any of the following deviations:
Strange sound;
Frayed/damaged wiring harnesses;
Cracked or broken connectors;
Uneven tread wear at one of the tyres;
Risk of damage by moisture
Risk of damage
Risk of injuries and damage to the wheelchair
20
Sigma, Sigma 230
2021-01
Maintenance

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sigma 230

Table des Matières