Technical Specifications - IKRA ART 4030 Manuel D'utilisation

Grass Trimmer with Rechargeable Battery ART 4030 LI

Technical Specifications

Operational voltage
Speed of rotation n
0
Mowing range Ø
Battery type
Charging device
Max. operational time (idle speed)
Weight
Sound pressure
( according to EN 50636-2-91)
Vibration on the handle
(according EN 50636-2-91)
The machines comply with the safety class III.
Technical changes are reserved.
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Direc-
tive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
Application
The machine is exclusively intended for cutting decora-
tive lawn, i.e. lawn edges. Any other use or use going be-
yond that, such as the cutting of brushwood and hedges
or large areas of lawn, is considered improper use. The
manufacturer / supplier is not liable for damages result-
ing from such use. The risk is borne by the user alone.
A proper utilisation also includes the observance of the
operating manual and the compliance with the conditions
of control and maintenance.
Keep the operating manual always at hand near the
place the machine is used!
Residual risks
Even if the device is used properly, a residual risk that
cannot be eliminated persists. Due to the type and design
of the device, the following potential dangers may result:
- Contact with the unprotected part of the thread cutting
equipment (cutting injury)
- Contact with cutting thread while in operation (cutting)
- Contact with ejecting parts of the cutting thread, cut
material, and other materials (cutting injury, blunt injury)
- Loss of hearing if required ear protection is not used
while working (hearing loss)
- Contact with electric current due to a defective or cut
supply cable (electric shock)
- Harmful emissions of cut material and cut particles.
If you do not observe the instructions contained in the
instruction manual, other residual risks may result due
to improper use.
GB | Operating Instructions
40 V DC
7200 min
30 cm
Li-Ion 40 V / 2,5 Ah / 100 Wh
R3-360-AH-U-02
R3-360-3A-02 rapid charger
R3-360-1A-02 standard charger
approx. 40 min
3,38 kg
80 dB(A)
< 2,5 m/s
The product is intended for persons who are 14 years old
and up. If the product is used by children who are 8 years
old and up or by persons with limited physical, sensory,
or mental capabilities or a lack of experience and knowl-
edge, then they must be supervised or informed regard-
ing how to use the device safely and to understand the
resulting dangers that are involved. Children are not per-
mitted to play with the device. Cleaning and maintenance
may not be completed by children without supervision.
Children should be supervised so that they do not play
with the device.
However, some residual risks remain despite the spe-
cific safety measures, safety instructions, and additional
safety regulations indicated in the operating manual, e.g.
commissioning the product unintentionally. If you do not
observe the instructions contained in the instruction man-
ual, other residual risks may result due to improper use.
Warning!
Prolonged use of a tool will subject the user to vibration
and shocks that could lead to Raynaud's syndrome or
Carpal tunnel syndrome.
This condition reduces the ability of the hand to sense
and regulate temperature, causes numbness and a
sensation of heat, and can cause damage to the nervous
and circulatory systems and to necrosis.
Not all factors that lead to Raynaud's syndrome are
known, but cold water, smoking, and illnesses that impact
the blood vessels and the circulatory system and severe
or long-lasting exposure to vibrations are known to be fac-
tors that contribute to the development of Raynaud's syn-
drome. Observe the following instructions to reduce the
risk of Raynaud's syndrome and Carpal tunnel syndrome:
GB-3
-1
[
K 3,0 dB(A)]
[ 2
K 1,5 m/s ]
2