Technical Specifications - IKRA IART 2520 LI Manuel D'utilisation

Masquer les pouces Voir aussi pour IART 2520 LI:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
Cordless Grass Trimmer IART 2520 LI

Technical Specifications

Operational voltage
Speed of rotation n
0
Mowing range Ø
Battery type
Runtime
Weight
Sound pressure
( according to EN 50636-2-91 )
Vibration on the handle
Mains battery charger
Mains voltage
Charging voltage
Charging current
Charging time
The machines comply with the safety class III.
Technical changes are reserved.
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Direc-
tive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
Application
The machine is exclusively intended for cutting decora-
tive lawn, i.e. lawn edges. Any other use or use going be-
yond that, such as the cutting of brushwood and hedges
or large areas of lawn, is considered improper use. The
manufacturer / supplier is not liable for damages result-
ing from such use. The risk is borne by the user alone.
A proper utilisation also includes the observance of the
operating manual and the compliance with the conditions
of control and maintenance.
Keep the operating manual always at hand near the
place the machine is used!
Residual risks
Even if the device is used properly, a residual risk that
cannot be eliminated persists. Due to the type and
design of the device, the following potential dangers
may result:
- Contact with the unprotected part of the thread cutting
equipment (cutting injury)
- Contact with cutting thread while in operation (cutting)
- Contact with ejecting parts of the cutting thread, cut
material, and other materials (cutting injury, blunt
injury)
- Loss of hearing if required ear protection is not used
while working (hearing loss)
GB | Operating Instructions
(according to EN 50636-2-91)
20 V DC
8500 min
-1
25 cm
Li-Ion 20 V / 1,5 Ah / 30,0 Wh
max. 60 min
1,93 kg
78 dB(A) K = 3,0 dB(A)
≤ 2,5 m/s
K = 1,5 m/s²
2
100-240 V ~ / 50-60 Hz
21 V DC
400 mA
approx 3 to 5 hours
- Contact with electric current due to a defective or cut
supply cable (electric shock)
- Harmful emissions of cut material and cut particles.
If you do not observe the instructions contained in the
instruction manual, other residual risks may result due
to improper use.
The product is intended for persons who are 14 years
old and up. If the product is used by children who are
8 years old and up or by persons with limited physi-
cal, sensory, or mental capabilities or a lack of experi-
ence and knowledge, then they must be supervised or
informed regarding how to use the device safely and
to understand the resulting dangers that are involved.
Children are not permitted to play with the device. Clean-
ing and maintenance may not be completed by children
without supervision.
Children should be supervised so that they do not play
with the device.
However, some residual risks remain despite the spe-
cific safety measures, safety instructions, and additional
safety regulations indicated in the operating manual,
e.g. commissioning the product unintentionally. If you do
not observe the instructions contained in the instruction
manual, other residual risks may result due to improper
use.
GB-3

Publicité

Table des Matières
loading

Table des Matières