Telescopic pole pruner & hedge trimmer (2 in 1) ITHK 800
TECHNICAL SPECIFICATIONS
Model
Operating voltage
Nominal frequency
Nominal power consumption
Idle speed n
0
Cutting length
Cutting capacity
Saw chain
Guide plate
Weight without cable
Noise pressure level
Vibration
1) EN ISO 11680-1:2011
2) EN ISO 10517:2009
WARNING: When in operation, the tool's actual vibration emissions value can deviate from the specified value de-
pending on how the tool is used, as in the following examples or because it is used in another way:
- How the tool is being used and which materials are being cut.
- The tool is well maintained and in good working order. The correct accessories are being used and care has been
taken to make sure they are sharp and in good working order.
- How secure the hand grip is and whether anti-vibration accessories are being used.
- Whether the tool is being used in accordance with its design and as specified in these instructions.
- The tool can cause hand-arm vibration syndrome symptoms if it is not used properly.
WARNING: To make sure, an assessment should be made of the strain exerted when the tool is in use, for example
when the tool is switched off or is idling. This will make it possible to significantly reduce the strain exerted during the
entire time the tool is in use.
- Minimise your risks if the tool vibrates.
- Take care of the tool as specified in these instructions and make sure the tool is properly lubricated (if necessary).
- If you use this tool regularly, you should invest in anti-vibration accessories.
- If the temperature is 10°C or less, do not use the tools. Prepare a work schedule so that work is distributed over
several days when using tools that exert high vibrations.
GB | Operating Instructions
ITKS 800
V~
230-240
Hz
50
W
800
-1
min
9000
mm
200
mm
91P033X
080NDEA041
kg
4,5
dB (A)
86
K 3,0 dB(A)
2
2 K 1,5 m/s
m/s
4,5 m/s
GB-4
ITHS 800
230-240
50
800
1700
410
18
5,0
1)
86
2 1)
2
4,5 m/s
2)
K 3,0 dB(A)
2 2)
K 1,5 m/s