EUROM HEAT Plug-in Manuel D'utilisation page 10

Technical data
Type
Supply voltage
Maximum capacity
Dimensions
Weight
General safety instructions
1. Before using the machine, carefully read this entire
instruction manual. Keep this booklet in a safe place
for reference.
2. Check the heater, including plug, for any visible
damage before using. Do not use a damaged heater.
Return
replacement.
3. This heater is strictly intended for normal domestic
use. Only use it as an additional heat source for your
home.
4. This heater in not suitable for use in wet or damp
spaces such as bathrooms, laundry rooms, etcetera.
Do not place the heater in the vicinity of taps,
fountains etcetera. Make sure it cannot fall into water
and prevent water from getting into the heater. Do
not use a heater that has a damp interior but have it
repaired. Never immerse the heater or plug in water
and never touch it with wet hands.
5. The supply voltage and utility frequency, specified on
the machine, need to match those of the socket that
is used. The electrical installation needs to be
protected by a residual current device (max. 30
mAmp).
6. Do not use this device with an extension lead or
junction box. The device may only be plugged into a
wall socket on a vertical wall and must be at least 20
cm away from the floor.
: HEAT Plug-in
: 220-240Volt – 50Hz
: 500 Watt
: 11 x 11 x 18 cm
: 0.4 kg
damaged heaters
EN
to
10
the dealer for