EUROM HEAT Plug-in Manuel D'utilisation page 15

Cleaning and Maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should regularly be removed! Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning or
carrying out maintenance work.

Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not
use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions! Make sure that no water gets into the

Use a vacuum cleaner to carefully remove any dust and dirt from the grills and
ensure that the air intake and outlet openings are clean. Be careful not to touch
or damage any internal parts during cleaning.

The heater contains no other parts which need maintenance. The appliance may
only be opened and/or repaired by properly authorized and qualified persons.
 At the end of the season, store the cleaned heater upright, in the original
packaging if possible, in a cool, dry and dust-free place.

If the heater becomes worn or is damaged beyond repair, do not dispose of it
with the household waste. Take it to your local authority's collection point for
electrical appliances where any reusable materials will be collected and
redistributed.
15
device.