Analog way OCTRO-QUATTRO OTR401 Manuel Utilisateur page 16

Chapter 5 : LCD FUNCTIONS DESCRIPTION (continued)
• If the selected input is a VIDEO signal (input type =SDTV---) the IMAGE MENU displays the following items:
[brightness] + ENTER.
4-5
Adjust the Brightness with
[contrast] + ENTER.
4-6
Adjust the Contrast with
[color] + ENTER.
4-7
Adjust the Color with
[hue] + ENTER.
4-8
Adjust the Tint of the picture (NTSC only) with
[u / over scan] + ENTER.
4-9
Select Underscan or Overscan with
• [underscan] = Underscan mode. The entire image is visible on the screen. Computer mode is underscan.
• [overscan] =
4-10 [sharpness] + ENTER.
This function allows increasing the sharpness of the image. Select a level with
4-11 [preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with ENTER.
• If the selected input is a COMPUTER signal (input type = Computer---) the IMAGE MENU displays:
[black level] + ENTER.
4-5
Adjust the black level with
[color] + ENTER.
4-6
Select a color (Red, Green, or Bleu) with
[optimize] + ENTER.
4-7
Select an item with
• [clock] = Manual adjustment of the pixel clock.
• [phase] = Manual adjustment of the pixel phase.
[preset] + ENTER.
4-8
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with ENTER.
[AUDIO] + ENTER.
5
[master volume] + ENTER.
5-1
Adjust the audio output level with
[audio source] + ENTER.
5-2
Select an item with
• [auto follow] = The audio follows the video image.
• [input --] =
[audio level] + ENTER.
5-3
This function allows to separately adjust the level of each audio input. Adjust the level with
NOTE: This function acts on the selected (diffused) audio input.
[audio balance] + ENTER.
5-4
This function allows adjusting for each input the audio balance. Adjust the level with
NOTE: This function acts on the selected (diffused) audio input.
[mute off] + ENTER.
5-5
Switch ON or OFF the audio output. Validate with ENTER.
PAGE 16
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid
seeing the corners and the borders. Standard TV display mode is overscan.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER:
The selected audio input (is permanently diffused).
+ ENTER.
+ ENTER and adjust the level with
OCTO-QUATTRO™
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.