Analog way OCTRO-QUATTRO OTR401 Manuel Utilisateur page 22

Chapter 7 : CONTROL SOFTWARE (continued)
7-4. USING THE SOFTWARE (continued)
Click on the Output tab, then select the Output rate (internal or follow), the Output Sync., the Type of
screen, and the Output format (in FAST mode only).
Click on the Image tab and adjust all your inputs.
• If the selected input is a video source:
Click on the Audio tab and select Auto follow (follow switching mode) or an Audio source (breakaway mode).
Then adjust the Level and the Balance of each audio source.
PAGE 22
• If the selected input is a computer source:
OCTO-QUATTRO™