Audio Out - Analog way OCTRO-QUATTRO OTR401 Manuel Utilisateur

Chapter 1 : INTRODUCTION (continued)
1-5. REAR PANEL DESCRIPTION
POWER:
LAN:
COMPUTER & VIDEO INPUTS:
INPUTS #1 & 2:
INPUTS # 3 & 4:
DISPLAY OUT:
ROOM OUT:
AUDIO IN:
1 to 4:

AUDIO OUT:

RS-232:
1-6. FRONT PANEL DESCRIPTION
INPUT SELECTION:
BLACK:
FREEZE:
IMAGE CENTERING:
LCD CONTROL
EXIT MENU:
ENTER:
ON / OFF:
PAGE 6
Standard IEC connector (100-250 VAC, 1A, 50-60 Hz automatic).
LAN communication port on a RJ45 connector (optional).
4 Universal (computer and video) inputs.
Computer, YUV and HDTV signals on the HD15 female input connector.
S.VIDEO (Y/C) signal on 2 BNC input connectors (Y & C).
Composite Video on one BNC input connector (C.V).
All signals on a HD15 female connector.
DATA output (RGBHV, RGB/S or RGsB) on HD15 female connector.
A room (+ 12 Vdc trigger) command output (3.5 mm jack female), allows to
control external functions such as up/down screen, lighting...
Audio stereo input balanced/unbalanced on a 5-pin MCO male connector.
Audio stereo output balanced/unbalanced on a 5-pin MCO male connector.
RS-232 communication port on a DB9 female connector.
Selection of the 4 input sources.
Allows to display a BLACK screen onto the output (the blinking LED indicates that this
function is active).
Allows to freeze the displayed output (the blinking LED indicates the FREEZE is active).
Allows to automatically position the image in the centering pattern.
Allows to scroll thru the different menus (in Control mode) or to adjust the master volume
(in Status mode).
Switches between Status and Control mode.
Validates a selected item.
AC power switch (O = OFF, I = ON).
OCTO-QUATTRO™