MRA 4025066156276 Instructions De Montage page 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
6 Plastic washers, 12 x 5 mm
4 Oval head screws, M5 x 20 mm
2 Oval head screws, M5 x 25 mm
2 Rubber nuts, M5
2 Spacers, 6 mm
2 O-rings, black, 4.5 x 1.5 mm
4 Neoprene discs 16x4,5x4mm
1 Edge protection strip with end
sleeves
How to mount the screen on your motorbike:
1. Stand your motorbike up on a level surface.
2. Dismantle the original screen.
3. Insert the rubber nuts included into the fairing brackets (P1).
4. Insert the M5 x 25 mm oval head screws and plastic washers included through the upper
holes in your MRA screen. After that, place the 6 mm spacers and O-rings onto the
screws from inside (P2). Insert the 4 neoprene disks into the screen as shown in picture
P2a.
5. Mount your MRA screen with the remaining four oval head screws (M5 x 20 mm) and the
plastic washers.
6. Line up your MRA screen towards the midline of your bike and tighten up the screws.
7. Mount the edge protector strip; slide the end sleeves over the ends of the edge protector
strip and gently crimp the sleeves with a pair of pliers to secure it (P3, P4).
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
CRF1000L Africa Twin 2016-
Article No..
--- Allen keys, 3 and 6 mm
10635
10673
10641
10629
11038
10992
10634
---
3
Required tools