EUROM CONVECTOR Panel de Luxe Manuel D'utilisation page 20


Decide where you want to mount
the heater. Make sure that the
heater has sufficient space around it
at all times and that no inflammable
materials are located nearby (see
also safety instructions). Do not
place the heater behind a door! The
heater's underside needs to be at
least 10 cm above the floor, the
sides at least 20 cm from the side
walls and the top at least 200 cm
from the ceiling, ceiling beams,
etcetera.

Secure the hanging frame to the
wall. Drill 2 holes in the wall 250 mm
away from one another, at least 350
mm above the floor and completely
horizontal. Push plugs into these
holes. Screw two long screws into
the plugs until they protrude by 8
mm. Hang the frame over these screws and allow to drop downwards into the
grooves (see diagram B). Now turn the screws to secure.

Hook the heater with the lowest recesses over the lowest clips on the hanging
frame. Tilt the heater against the wall and let the upper clips click into the upper
recesses on the heater. Screw the two smaller locking screws through the holes
in the upper clips, that are located closest to the heater; the clips can no longer be
depressed (see diagram C).

In order to take the heater off the wall, first remove the locking screws, push the
upper clips downwards and tilt the heather forwards. Now, you can pull the heater
off the lower attachments.
20