EUROM CONVECTOR Panel de Luxe Manuel D'utilisation page 19

Description
1. Heat outlet grille
2. Air inlet grille
3. Swivel wheels (x4)
4. Operation panel
5. Main switch
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your
vendor for inspection or replacement.
Do not use the heater before it has been installed in accordance with the
Composition and Installation
Free-standing (as a portable heater):
Attach the feet supplied to the underside of the heater (see picture):

Turn the heater upside down. Place a blanket (or something similar) under the
heater to prevent damage!

Push both feet (each with 2 swivel wheels) into the recesses on the base of the
heater until you hear them click into place.

In order to remove the feet, push the clamp (A) in; you can now remove the foot.

Return the heater to the upright position.

Make sure a working heater is always placed on a solid, flat and horizontal
surface. Deep-pile carpeting is unsuitable!
Mounted (secured to a wall):
Choose a solid, flat and completely vertical wall made of non-flammable and non-
melting material on which to mount the heater (i.e. no wood, synthetic materials, etc!)
following instructions!
19