Utility And Midi Functions (Util. & Midi Menu) - Viscount UNICO 500 Guide De L'utilisateur

Viscount
UNICO 500 - 400 - 300
The UTILITY & MIDI menu, which can be recalled by selecting the field of the same name in the main
video page, contains all the accessory functions and the settings relating to the organ's MIDI interface.
The menu is displayed on three screens:
The first part contains the accessory and utility functions:
o PIST. COMBINE (Piston Combine): synchronisation of the dedicated combinations of manual II
(Unico 500 and 400) or I (Unico 300) with those of the pedal board.
o KEYBOARDS INV. (Keyboards Inversion): inversion of the manuals, so that the Man.I stops are
played with the second manual and vice-versa.
o TRACKER TOUCH: simulates the typical tracker touch of mechanical organs that affects the attack
times. Attack time is delayed on flue pipes only, release is delayed on all stops.
o 1st SHORT OCT. (First short octave): activation of the short octave on the first octave of the manuals
and pedal board.
o AUTO MAINPAGE: automatic return to the main video page if no display functions are used for 10
seconds.
o LCD CONTRAST: regulates the display contrast.
o SET DATE & TIME: date and time setting.
o LOCK ORGAN: setting of the code used to lock out the organ to prevent access to the instrument's
set-up screens and the saving of combinations, the Tutti and the Crescendo.
o RESTORE FACT. SET (Restore factory settings): restores the factory settings.
o OP.SYS. UPGRADE (Operating System upgrade): operating system upgrade.
The second part of the menu relates to the MIDI interface settings:
o Tx AND Rx CHANNEL: MIDI transmission and reception channel set-up.
o Tx AND Rx FILTER: MIDI transmission and reception filter set-up.
o PROG. CHANGE SEND (Program Change send): saving of the combinations and transmission of
MIDI Program Change and Bank Select messages.
o PEDAL / KEYB TOUCH (Pedal / Keyboard touch): selection of the dynamic curves of the manuals
for use of the Orchestra voices and the transmission of MIDI notes.
o COUPLED NOTES: this control allows to select the notes to send through MIDI. Select YES to send
both the notes actually played on the manuals and the ones resulting from the coupling controls.
For example, by playing on the pedalboard while the coupling II/P is active, notes from the pedalboard
will be transmitted both on the pedalboard MIDI Channel AND on the Manb.II MIDI Channel.
Select NO to send only the notes physically played (in this example, notes will be transmitted only on the
pedalboard channel).
10. UTILITY AND MIDI FUNCTIONS
(UTIL. & MIDI menu)
60
User Guide