Installation Of The Built-In Oven - NEFF U 1644 Série Notice De Montage Et D'utilisation

Installation of the
built-in oven
Push the built-in oven into the installation
roughing of the conversion cabinet and align the
unit until it is in a level position.
Open the oven door and, using one screw on
each side, fasten the built-in oven to the side
strips of the conversion cabinet.
When screwing in the two screws (enclosed in a
bag with the built-in oven), ensure that they are
pointing outwards at a slight angle. Please use
these screws only.
Verify that the built-in oven is positioned securely
and in a level position, and that the required
installation dimensions have been maintained.
In units featuring telescoping extensions,
these may not move by themselves.
In units featuring EasyClean, after filling 0,4 l
of cleaning solution into the recess in the
oven floor, the liquid must not spill toward the
front.
Furniture programmes
Cooker conversion cabinets from virtually all lines
of kitchen furniture are suitable for installing the
built-in oven. However, the veneers or plastic
laminates on the conversion cabinets must be
applied with heat-resistant cement (90° C).
If plastic laminates or cement are not sufficiently
heat-resistant, warping, bubbling or detachment
of the finish may result.
55