Hoshizaki KM-1301S_J-E Notice D'installation page 10

7. Stacking Remote Condenser Units
1) Install the lower remote condenser unit as described
earlier in this section.
2) Place the upper remote condenser unit on top of the
lower. See Fig. 15.
3) Secure the upper remote condenser unit to the lower
remote condenser unit with the 4 screws provided.
4) Install refrigerant lines and make electrical connection
as described earlier in this section.
Screws
Fig. 15
Upper Remote
Condenser Unit
Screws
Lower Remote
Condenser Unit
10