Motor Oil Level Check - Betamotor ALP 4.0 Mode D'emploi

3
Fig. A
GB
Motor oil level
Fig. B

MOTOR OIL LEVEL CHECK

On this vehicle oil check must be carried out
while the motor is hot, since the oil tank is
positioned higher than the motor (see scheme).
Procedure for oil level check
• Verify the presence of oil inside the motor
block. In order to do this, loosen the oil
level inspection screw A on the motor
block and verify oil draw. This way, we
can be assured that there is a certain
quantity of motor oil inside the motor
block.
• In case there is a lack of oil drawn, pro-
ceed by topping-up the oil (1.9 lt) through
the L oil filling cap (see figure).
118