Betamotor ALP 4.0 Mode D'emploi page 119

Oil level check
To be carried out only after having verified
the presence of oil in the motor (see page
118).
• Start the motor running and let it run on
minimum for 3 minutes.
• Turn the motor off and wait one minute.
• Remove the cap from the oil filling open-
ing.
• Using a clean rag, remove traces of oil
from the level rod.
• Holding the motor-bike in a vertical posi-
tion, reinsert the level rod until it touches
the border of the oil filling opening, with-
out, though, screwing top on.
• Retrieve the oil level rod and check the
oil level. The oil level indicated on the
rod should be between M (MAX) and N
(MIN). If the oil level should be below
the N line, add new oil into the oil filling
opening until the oil level is parallel to M
(MAX).
WARNING:
Never drive the motor-bike if the oil level
of the motor is below the N line (M/N) on
the level rod.
Never fill up the motor with oil above the
M level line (MAX).
119
3
GB