Selecting Km/H Or Mph; Setting The Number Of Hours To The Next Oil Change - Betamotor ALP4T 125 cc 2006 Mode D'emploi

1
Figure 12

20.4.4 Selecting Km/h or Mph

Press and hold down the SCROLL button
until the bars - - - - are displayed.
As soon as the button is released, only
Km/h or Mph will blink to denote which
unit is active at that moment.
Briefly press SCROLL to toggle between
units.
To confirm the current selection, press and
hold down the SCROLL button until WS
is displayed in the bottom right corner.
Once the button is released, the display
will appear as shown in Figure 11.
Pressing SCROLL for a short time brings
up Figure 12.
20.4.5 Setting the number of
hours to the next oil change
Press and hold down the SCROLL but-
ton until the bars - - - - are displayed.
The value is updated and stored using
the same procedure described for Figure
7. Pressing SCROLL for a short time
brings up Figure 13.
GB
101