Betamotor ALP 4.0 Mode D'emploi page 109

1
NOTES ON THE BATTERY G
Insert the new battery in the specially designed compartment under the saddle (see
photo) tightening it with the H equipment elastic H.
Connect the black cable terminal to the negative (-) and the red cable to the positive
(+) inserting the red cap protection.
Reassemble the saddle.
HV COIL - STARTING DEVICE
In order to have access to these components, it is necessary to remove the saddle,
the front sides and the tank (see pages 133, 134 for ALP and pages 135, 136 for
MOTARD).
I
GB
109