DITEC SPRINT Manuel D'installation page 14

3.4 Installation with SPRINTBRAS articulated arm
GB
Use the SPRINTBRAS articulated arm for doors that open
inwards (seen from automation side).
- The fastening distance of the automatic system in relation
to the door wing can be between 185 mm and 45 mm.
- Adjust the length of the arms [E] and [F] so as to form an an-
gle of 80÷90° in relation to the arm [M], with the door closed.
Note: the SPRINTBRAS articulated arm is assembled
for door wings with left-hand opening; in the case of door
wings with right-hand opening, separate the arm [G] from
the arm [M] (removing the plug) and reassemble the two
arms, rotated by 180°.
SPRINT - IP1546
- For distances between 45 mm and 20 mm, remove the
arm [F] and fasten the arm [G] to the bracket [E] with the
spacer and the screw supplied, so as to form an angle of
80÷90° in relation to the arm [M].
3.5 Installation of door stop
Fasten the door stop (supplied as a mechanical opening stop)
to the floor.
14