Technical Specifications; Disposal - Dantherm CDT 22 Manuel D'utilisation

ENGLISH
If the unit does not start again contact a DANTHERM dealer. This also applies if the unit is running
but not producing any water. This is probably due to a fault in the cooling circuit, which can only be
repaired by a service engineer.
NOTE: If the unit does not work as it should, switch it off immediately !
9.

Technical specifications

Model
Working range – humidity
Working range – temperature
Power supply
Max. current consumption
Max. power consumption
Air volume
Refrigerant
Refrigerant quantity
Capacity of water container
Sound level 1m distance
Weight
Model
Working range – humidity
Working range – temperature
Power supply
Max. current consumption without heating element
Max. power consumption without heating element
Max. current consumption with heating element
Max. power consumption with heating element
Air volume
Refrigerant
Refrigerant quantity
Capacity of water container
Sound level 1m distance
Weight
9.1

Disposal

This unit contains refrigerant type R407C and compressor oil. When scrapping the unit, bring the
compressor to a place of discharge which is approved by the authorities.
CDT 22
%RH
°C
V/Hz
A 2,9
kW 0,6
3
m /h 280
- R 407 C
kg 0,300
l 5,5
DB(A) 57
kg 41
16
CDT 35 CDT 50
40 - 100
3 - 30
230/50
2,7 4,1
0,7 0,950
400 800
R 407 C R 407 C
0,475 0,575
12,5 12,5
59 61
52 60
CDT 35 S
%RH 40 - 100
°C 3 - 30
V/Hz 230/50
A 3,7
kW 0,9
A 8,0
kW 1,9
3
m /h 650
- R 407 C
kg 0,475
l 12,5
DB(A) 62
kg 56
CDT 85
6,9
1,5
1000
R 407 C
1,600
-
64
74