Description Of Function; Technical Data - Dantherm CDP 35T Manuel D'entretien

1. Description of function

CDP 35T, 45T and 65T are working in accordance with the condensation principle. The humid air is drawn into the
unit by one, two or three fans. When passing through the evaporator the air is cooled down to below dew point and
water vapour is condensed into water, which is drained away. The now dry air is then passed over the condenser
coil where the air is heated. As a result of the released evaporator heat and the working energy of the compressor
being turned into heat energy, more heat is returned to the air than was previously extracted. This extra heat
corresponds to an approximate increase in temperature of 5ºC. The repeated circulation of air through the unit
reduces the relative humidity, giving very rapid but gentle drying.

1.1 Technical data

Working area – humidity
Working area – temperature
Air volume at max. external pressure
Power supply
Max. power consumption
Max. ampere consumption
Refrigerant
Quantity of refrigerant
Noise level* (1 m away from unit)
Weight
Dimensions – H x L x W
*Measured opposite to the duct openings
Warmer and dehumidified air
Warm humid air
CDP 35T
%RH 40-100
ºC 10-36
3
m /h 250
V/Hz 1x230/50
kW 0,72
A 2,8
R407C
kg 0,6
dB(A) 44
kg 57
mm 680 x 890 x 290 680 x 1200 x 290 680 x 1735 x 290
10
CDP 45T CDP 65T
40-100 40-100
10-36 10-36
500 750
1x230/50 1x230/50
1,05 1,65
4,3 7,2
R407C R407C
0,95 1,6
46 48
68 95