Lucimed Luminette Drive Mode D'emploi page 13

from the first use. Others, after one to two weeks of daily use.
E. How do you charge the Luminette® Drive?
Charging the device is very simple.
To do this:
•
Connect the type-C connector of the cable to the specified location
on your Luminette® Drive (see figure 1) and connect the other
standard USB connector to the charger port.
•
Plug the charger into the cigarette lighter port of your car.
•
When the device is fully charged (charging time is about 2 hours),
disconnect the cable from the device.
Charge indication:
•
When your Luminette® Drive is charging, the green charging
indicator light flashes slowly.
•
When your Luminette® Drive is fully charged, the same green light
stops flashing and remains On.
•
In the event of an error (battery or circuit failure), the red LED flashes
quickly.
•
The device can be used while it is charging.
Device autonomy:
Its autonomy depends on the intensity chosen. As an indication, the
Luminette® Drive should have an autonomy of at least ten sessions. The
13
EN