Introduction - Hendi 210215 Mode D'emploi

• Turn off the appliance before pulling the plug out of the socket.
• Never carry the appliance by the cord.
• Do not use any extra devices that are not supplied along with the appliance.
• Only connect the appliance to an electrical outlet with the voltage and frequency
mentioned on the appliance label.
• Avoid overloading.
• Turn off the appliance after use by removing the plug from the socket.
• Always remove the plug from the socket when fi lling or cleaning the appliance.
• The electrical installation must comply with the applicable national and local
regulations.
• This appliance is not intended for use by persons (including children) with re-
duced physical, sensory or mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.

INTRODUCTION

• This manual is meant to provide customers with
information on the slicer and its specifi cations
EN
and the necessary operating and maintenance
instructions in order to guarantee the best possi-
ble use of the machine and preserve its effi ciency
in the long term.
4
• This manual is to be used by qualifi ed and skilled
people will be informed about the use of the slic-
er and its periodical maintenance.