Publicité
Les langues disponibles
Les langues disponibles
Max. discharge power:
Discharge current:
Protective functions:
Dimensions:
Charger controls
Screen
Menu control
buttons
Output for battery
pack connection
Using the charger
-
Connect the crocodile clips to a 12 V lead-acid battery or a suitable mains PSU; take
great care over correct polarity (red = positive / black = negative).
-
The LCD screen will show "AUSWAHL MODUS / AUTOMAT/MANUELL" or "MODE
SELECT / AUTOMATIC/MANUAL".
-
Selecting the language: To change the language hold the ENTER button pressed in
while you connect the power supply; a Language Select menu will appear. You can
switch between DEUTSCH (German) and ENGLISH by pressing the - or + button.
Change the setting to the language of your choice.
-
Connect the battery charge leads to the OUTPUT sockets (red = positive / black = nega-
tive).
-
Connect the battery pack to the charge leads with correct polarity.
-
The charger is now ready for use.
-
Press the MAN or AUTO button to switch between manual and automatic charge and
discharge.
AUTOMATIC MODE
The charger selects the optimum current and voltage values.
CHARGE
START
NICD AUTO.
MODE
Operating instructions
POWER PEAK ULTIMATE
approx. 20 W
0.5 A ... 3.0 A
Polarity protection at input and output, short-circuit
protection on output, overheating protection, low voltage
protection, excess voltage protection
approx. 125 x 155 x 80 mm
If you press the MODE button repeatedly you can switch bet-
ween CHARGE, DISCHARGE and DISC/CHAR for NICD and
NIMH packs separately.
11
Order No.
8427
Fan
Power supply
Publicité
