Pitch Bend - Matching The Beat Between Two Music Pieces - IMG STAGELINE MPX-40DMP Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Loop: A certain section of a title can be
repeated as a seamless loop as many times
as desired.
1) Press the button
(31) to start the re-
play. When you have reached the desired
starting point of the loop, press the button
IN (28).
2) When you have reached the desired end
of the section while replaying, press the
button OUT (28). The title section is con-
tinuously repeated. As long as the loop is
replayed, the display shows LOOP (M).
3) To exit the loop and to continue the title,
press the button OUT for a second time.
To restart the loop, press the button
RELOOP (28) again.
6.7 Pitch Bend – Matching the beat
between two music pieces
When using a second MP3 player, it is possible
to synchronize the beat of two music pieces with
the same speed. Thus, the dancing rhythm is not
interrupted when crossfading from one music
piece to the other one.
1) First use the speed control (26) to match the
speed of the music piece to which cross -
fading is desired to the speed of the current
music piece. The easiest way to do this is to
adjust the same number of beats per minute
with the sliding control, see chapter 6.2.2.
2) Synchronize the beats of the music piece to
which crossfading is desired to the beats of
the current music piece with the buttons
PITCH + and - (29):
— As long as you keep the button + pressed,
the title is faster.
— As long as you keep the button - pressed,
the title is slower.
Thus, the beats are displaced in relation to
the beats of the current music piece.
All rights reserved by MONACOR
manual may be reproduced in any form or by any means for any commercial use.
7 Specifications
Inputs
Sensitivity/ Impedance
MIC, mono: . . . . . . . . .
PHONO, stereo: . . . . .
LINE and CD, stereo: . 300 mV/ 25 kΩ
Outputs
MASTER, stereo: . . . . 870 mV
BOOTH, stereo: . . . . . 950 mV
REC, stereo: . . . . . . . . 800 mV
Headphones, stereo: . ≥ 8 Ω
Frequency response: . . . 20 – 20 000 Hz
THD: . . . . . . . . . . . . . . . . < 0.04 %
S / N ratio: . . . . . . . . . . . . > 60 dB
Tone control MIC
Low frequencies: . . . . ±12 dB at 70 Hz
High frequencies: . . . . ±12 dB at 7 kHz
Equalizer CH 1 – 4
Low frequencies: . . . . +12 dB, -24 dB
Midrange frequencies: +12 dB, -24 dB
High frequencies: . . . . +12 dB, -24 dB
Talkover: . . . . . . . . . . . . . -15 dB
Power supply: . . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . . 20 VA max.
Ambient temperature: . . . 0 – 40 °C
Dimensions: . . . . . . . . . . 482 × 177 × 115 mm,
Weight: . . . . . . . . . . . . . . 3.4 kg
Subject to technical modification.
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction
4 mV/1 kΩ
6 mV/ 56 kΩ
at 30 Hz
at 1.2 kHz
at 15 kHz
4 RS
GB
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

20.2710

Table des Matières