Timex W-268 Mode D'emploi page 279

Your Intelligent Quartz watch crown has three positions:
™
closed, middle and outer. To familiarize yourself to the
difference between the various positions extend the
crown to its outer position and then push the crown very
lightly until you feel it click into the middle position.
DATE AND TIME SETTING
To set the date and time:
1. Pull the crown to its outer position and turn it until
the correct time is shown. Ensure AM/PM setting is
correct by verifying that the date changes at midnight,
not noon.
2. Pull the crown to its middle position and turn it until
the correct date appears in the date window. Note:
The date changes between 10 pm and 2 am. Do not
change the date during this timeframe. Doing so could
damage the watch movement.
46
3. Push the crown in when finished.
For months with fewer than 31 days, the date will need
to be adjusted.
INDICATOR HAND
(4TH CENTER HAND) ADJUSTMENT
TO READJUST A MISALIGNED INDICATOR HAND:
1. Pull the crown to its outer position. The upper and
lower hands reset to the ends of their sweeps,
automatically.
2. The 4th center hand should point to 12 o'clock. If it
does not within 5 seconds of pulling the crown to
its outer position, press A or B to move the hand
counterclockwise or clockwise, respectively, until it
points to 12 o'clock.
3. Push the crown in when finished.
47