Bracelet Link Removal - Timex W-268 Mode D'emploi

Table des Matières

Publicité

FOLDOVER CLASP BRACELET
1. Find spring bar that connects bracelet to clasp.
2. Using a pointed tool, push in spring bar and gently
twist bracelet to disengage.
3. Determine wrist size, then insert spring bar in correct
bottom hole.
4. Push down on spring bar, align with top hole and
release to lock in place.
58

BRACELET LINK REMOVAL

REMOVING LINKS:
1. Place bracelet upright and insert pointed tool in
opening of link.
2. Push pin forcefully in direction of arrow until link is
detached (pins are designed to be difficult to remove).
3. Repeat until desired number of links are removed.
RE-ASSEMBLY:
1. Rejoin bracelet parts.
2. Push pin back into link in opposite direction of arrow.
3. Press pin down securely into bracelet until it is flush.
59

Publicité

Table des Matières
loading

Table des Matières