Date And Time Setting - Timex W-268 Mode D'emploi

OVERVIEW
Upper Hand
Chrono Hours
2nd Time Zone
Minute Hand
Second Hand
Closed
1 2
Position
16
4th Center Hand
Hour Hand
Button A
Date Window
1 2 3
CROWN
Chrono Minutes Scale
Button B
Lower Hand
Middle Outer
3
Position Position
NOTE: Your Intelligent Quartz
positions: closed, middle, and outer. To familiarize yourself
to the difference between the various positions, extend
the crown to its outer position and then push the crown
very lightly until you feel it click into the middle position.

DATE AND TIME SETTING

To set the date and time:
1. Pull the crown to its outer position and turn it until
the correct time is shown. Ensure AM/PM setting is
correct by verifying that the date changes at midnight,
not noon.
2. Pull the crown to its middle position and turn it until
the correct date appears in the date window. Note:
The date changes between 10 pm and 2 am. Do not
change the date during this timeframe. Doing so could
damage the watch movement.
watch crown has three
™
17