CONSTRUCTA CD 969650 Notice D'utilisation Et De Montage page 14

Installation
10. lign the extractor hood. To do this,
loosen the ceiling screws in the support
frame.
11. Connect the pipes.
12. Connect the power.
13. Carefully remove the protective foil.
14. Place the two sections of the upper flue
on the extractor hood and clip together.
Protect the extractor hood from
damage.
14
15. Push up the upper flue section and
screw into position.
16. Insert the two sections of the lower flue
and clip together.
Protect the extractor hood from
damage.