Burkert PTB 03 ATEX 5014 X Instructions De Service page 11

Use in petrol pumps
ATTENTION
The valves may only be dismantled by the manufacturer. The
always represent a closed system.
The Type 641, 2832, 6013 and 6022 solenoid valves (Inner Zone 0) are used
for explosive steam/air mixtures in the in gas feedback equipment of filling
stations.
The magnetic coil 64.- is mounted on the body using 4 sealed M4x59 cylinder
screws.
The magnetic coil AC10-..-.-... is secured onto the fitting using a sealed nut.
Bolted together as a block
Type 641 and Type 2832
03 ATEX5014 X - 9