Starting Sauna Mode; Switching Off Sauna Mode; Starting Combi Operation - Harvia SENTIO JUST-105W-CO Instructions D'installation Et Mode D'emploi

Instructions for use for the user

10.4. Starting sauna mode

1. Press the temperature symbol d in the middle of the temperature touch
wheel e.
► The sauna heater switches on.
2. Use the temperature touch wheel e to set the preferred temperature.
► The temperature LED wheel f shows the preset temperature for a few
seconds.
► In two-sensor mode, the temperature LED wheel f then shows the actual
temperature. In single-sensor mode, it continues showing the preset
temperature.

10.5. Switching off sauna mode

● Press the temperature symbol d in the middle of the temperature touch wheel e.
► The sauna heater switches off.
► The temperature LED wheel f goes out.

10.6. Starting combi operation

1. Press the temperature symbol d in the middle of the temperature touch
wheel e.
► The sauna heater switches on.
2. Use the temperature touch wheel e to set the preferred temperature.
► The temperature LED wheel f shows the preset temperature for a few
seconds.
► In two-sensor mode, the temperature LED wheel f then shows the actual
temperature. In single-sensor mode, it continues showing the preset
temperature.
3. Press the humidity symbol a in the middle of the humidity touch wheel b.
► The evaporator switches on.
4. Use the humidity touch wheel b to set the preferred humidity.
► The humidity LED wheel c shows the preset humidity in white or red for
a few seconds.
p. 35/46
EN