Use For The Intended Purpose - BWT AQA drink Pro 20 HCS Instructions De Montage Et De Service

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
3. USE AND CONSTRUCTION

3.1 USE FOR THE INTENDED PURPOSE

This BWT AQA drink Pro 20 water dispenser may only be fed with cold water of a drinking water
quality. Any other use is regarded as not in accordance with the intended purpose. The AQA
drink Pro 20 is a water dispenser which is connected directly to the drinking water supply. Un-
limited access to clean drinking water is thus available (depending on the filter capacity). Ideally,
the water dispenser can be combined with BWT filter technology for perfect enjoyment thanks
to the water's enrichment with Magnesium.
3.2 CONSTRUCTION AND FUNCTION OF THE AQA DRINK PRO 20
The AQA drink Pro 20 water dispenser offers three different water options:
» HCS: hot, cooled still, cooled with CO
» HCA: hot, cooled still, non-cooled still
Fig. 1 (HCS) and fig. 2 (HCA) shows the AQA drink Pro 20 water dispenser.
The following elements are included on the front:
1
3
Fig. 1: Front view of the AQA drink Pro 20 HCS
EN
1. LED indicators
2. Selection buttons
3. Drip tray
4. Water outlet
Place a glass on the grid of the drip tray underneath the water outlet. The water outlet and the
UV lamp start immediately after pressing the desired selection button; press once for cooled,
cooled with CO
or non-cooled still and press twice for hot. The control panel is shown in fig. 3
2
and 4.
24
2
2
1
4
3
Fig. 2: Front view of the AQA drink Pro 20 HCA
Explanation of the selection buttons
Fig. 3: Control panel of the AQA drink Pro 20 HCS
2
4
Fig. 4: Control panel of the AQA drink Pro 20 HCA
Explanation of the LED indicators:
» LED indicator COLD is on when the cold water function is on: cooled water is available.
» LED indicator CO
» LED indicator HOT on when hot water function on: hot water is available.
» LED indicator UV is on when the UV lamp is on: UV lamp is functional.
» UV LED indicator flashes when the UV lamp is not working or is not connected.
Note!
In the HCA versions the UV LED can also indicate a leakage or full drip tray (see chapter 5.7).
cooled water, still
hot water
carbonated water with CO
cooled water, still
hot water
room temperature water, still
is on when the CO
function is on: carbonated water (with CO
2
2
2
EN
) is available
2
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Aqa drink pro 20 hcaAqa drink pro 20 cas

Table des Matières