Use And Construction; Use For The Intended Purpose - BWT AQA drink 1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Use and construction

3.1 Use for the intended purpose

This BWT AQA drink 1 water dispenser may only
be fed with cold water with drinking water
quality. Any other use is regarded as not in
accordance with the intended purpose. The AQA
drink 1 is a water dispenser which is connected
directly to the drinking water supply. Unlimited
access to clean drinking water is thus available
(depending on the filter capacity). Ideally, the
water dispenser can be combined with BWT
filter technology for perfect enjoyment thanks to
enrichment with magnesium.
3.2 Construction and function of the AQA drink 1
The AQA drink 1 water dispenser offers three differ-
ent water options:
» CAS: cooled and still, room temperature and
still, cooled with CO2
Fig. 1 shows the AQA drink 1 water dispenser. The fol-
lowing elements are included: on the front:
1
LED indicators
2
Selection buttons
3
Drip tray
4
Water outlet
1
3
Fig. 1: Front view of the AQA drink 1 (CAS)
18
After the water dispenser has been installed (Chapter
5), the required type of water can be chosen. Place a
glass on the grid of the drip tray under the water out-
let and choose the required type of drinking water by
pressing one of the selection buttons. Water dispens-
ing and UV sterilization start immediately. The control
panel for the CAS device is shown in Fig. 2
Fig. 2: Control panel of the AQA drink 1 CAS
Explanation of selection buttons
Cooled water, still
Room temperature water, still
carbonated water with
2
Explanation of the LED indicators
» LED indicator COLD is on when the cold water
function is on: cooled water is available.
» LED indicator CO2 is on when the CO2-function
4
is on: carbonated water (with CO2) is available.
» LED indicator UV is on when the UV lamp is on:
UV lamp is functional.
» UV LED indicator flashes when the UV lamp is
not working or is not connected.
Note!
The LED lighting at the water outlet flashes when the
wastewater tank (available as an option with the cabine)
is full or leak protection is activated.
CO2

Publicité

Table des Matières

Dépannage

loading

Ce manuel est également adapté pour:

150956

Table des Matières