Setting The Alarm Volume; Setting The Alarm Repeat Frequency; Switching On/Off The Alarm Clock; Switch Off The Alarm Clock After The Alarm Sounds - Sonoro SO-210 Mode D'emploi

9.3

Setting the alarm volume

After you have set and confirmed the alarm source,
you can set the alarm volume (Fig. 25).
Fig. 25: Setting the alarm volume
1. Select the desired volume by turning the click
wheel or pressing the [Next] or [Previous] but-
tons.
2. Press the click wheel to confirm the setting.
i
The alarm audio playback always starts with the
minimum volume and gradually increases to the
specified volume level.
9.4

Setting the alarm repeat frequency

After you have set and confirmed the alarm volume,
you can set the alarm repeat frequency (Fig. 26).
Fig. 26: Setting the Snooze function
1. Select the desired interval by turning the click
wheel or pressing the [Next] or [Previous] but-
tons.
2. Press the click wheel to confirm the setting.
9.5

Switching on/off the alarm clock

Switching on the alarm clock
1. To switch on the alarm clock, briefly press the
[Alarm 1] or the [Alarm 2] button on the front of
the device or the remote control.
Switching off the alarm clock
2. To switch off the alarm clock, briefly press the
[Alarm 1] or [Alarm 2] button again.
Switch off the alarm clock after the
9.6
alarm sounds
1. To switch off the alarm, press one of the fol-
lowing buttons:
n [Alarm 1]
n [Alarm 2]
56
n Click wheel
n [Standby]
ð The alarm will remain activated for the next
day. The non-recurring alarm setting is an
exception.
2. Press [Snooze] button on the top of the device
or the remote control to activate the Snooze
function. The remaining snooze time is dis-
played. After the set time expires, the alarm will
sound again.
9.7

Setting the Snooze function

Fig. 27: Setting the Snooze function
1. Briefly press the [SNOOZE] button in Standby
mode. Press and hold the [SNOOZE] button in an
operating mode until the Snooze setting appears
(Fig. 27).
ð The Snooze symbol (Fig. 27/1) appears on
the display.
2. Turn the click wheel to set the snooze time.
i
Alternatively, you can also use the [Next] or
[Previous] buttons to set the snooze time.
3. Press the click wheel to confirm the entry.
General audio playback func-
10
tions
To playback audio from different media, select the
relevant mode using the [MODE] button on the front
of the device or select the relevant mode on the
remote control.
© 2013