Playing A Sequence Frame By Frame; Playing A Sequence At Variable Speeds; Searching For A Specific Sequence - Samsung DVD-V6700 Manuel D'utilisation

Playing a Sequence Frame by
Frame
You can
• Stop the cassette at a given frame (image)
• Advance one frame at a time
No sound is heard when playing back frame by
frame.
1
Press the :
• ‹ll button to start playing the cassette.
• ‹ll button again to make still mode.
• F.ADV button to advance frame by frame.
• ‹ll button to return to normal playback.
• Vertical stability: When playing back frame
by frame, interference may be seen on the
screen. Press the TRK
minimize this effect.
Playing a Sequence at Variable
Speeds
You can vary the playback speed using the
Shuttle function (up to nine times the normal
speed). Example: You wish to analyse a sports
person's technique, movement by movement.
• No sound is heard when playing a sequence
at variable speeds.
1
Press the :
• ‹ll button to start playing the cassette.
• SHUTTLE (<<) button to play the cassette
backwards.
• SHUTTLE (>>) button to play the cassette
forwards.
2
Each time you press the SHUTTLE button,
the speed is changed as shown in the
following illustration.
REVERSE REVERSE REVERSE
PLAY PLAY PLAY
STILL
X9 X5 X3
(œ œ ƒ ƒ
or ) button to
SLOW SLOW PLAY PLAY
MOTION MOTION X3 X5
PLAY
X1/10 X1/5

Searching for a Specific Sequence

Each time you record a cassette on this DVD-
VCR, an "index" is automatically marked on the
tape when recording starts. The Search function
allows you to fast-forward or rewind to a specific
index and start playback from that point.
Depending on the direction selected, the index-
es are numbered as follows:
Prev
etc. Seq.
2
• This DVD-VCR uses a standard indexing
system (VISS). As a result, it will recognize
any indexes marked by other VCRs using the
same system and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for
the 0:00:00 counter position on a cassette.
Press the CLEAR button at the point on the
tape where you want to set the counter to
0:00:00. The VCR will rewind or fast forward,
searching for the 0:00:00 counter position, and
then automatically stop at that position.
1
Press the MENU button, then press the œ or
ƒ button to select FUNC. The Function
menu is displayed. Press the OK or ‹ button.
2
Press the œ or ƒ button to select VCR
Function, then press the OK or ‹ button.
The VCR Function menu is displayed with
the Go To [0:00:00] selected.
SETUP
Go To [0:00:00]
DVD End Search
Intro Scan
VCR
PLAY
X9
PROG
FUNC
• It can be displayed simply by pressing the
SEARCH button.
3
Press the OK or ‹ button again.
Seq. being Next
played Seq.
1 1
VCR Function
OK RETURN MENU
English - 29
etc.
2