SSS Siedle plug+play BFCV 850 Série Notice D'utilisation page 8

SD card
An additional SD card can be inserted
at the top of the device which has a
memory capacity of between 32 MB
and 2 GB; in the as-delivered status,
a dummy card is inserted to protect
the unit from dust. The memory card
is used
• to extend the unit's internal video
memory and
• to transmit the pictures to a PC
with the aid of the relevant reading
unit.
Also with a memory capacity of more
than 256 MB, the SD card is able to
store a maximum of 255
pictures in *.tif format with a resolu-
tion of 640 x 480 pixel and a file size
of appr. 1 MB. When the memory
capacity is exhausted, or the maxi-
mum number of pictures has been
saved, the oldest picture is over-
written every time a new one is
taken.With the card inserted, the
SD card symbol is displayed at the
top of the screen.
The following displays are possible:
SD card correctly detected
Initializing SD card
Card faulty or write
protected
Write/Read process
Do not remove the SD card
during the write and read process.
To format the SD card, use the bus
telephone. If you wish to
format it at the PC, use the
FAT 16 format.
8
Main menu
To access the main menu, press
the Enter button and select Menu
at the bottom line of the monitor
using the control button.
Video memory
Information on the number of
saved and new pictures at the top
of the screen.
• Display picture list
Display of the pictures stored in
the device. New pictures are mar-
ked with a * symbol.
• Delete all pictures
Deletion of all pictures stored in
the unit.
Memory card
• Display picture list
Display of the stored pictures.
• Format memory card
The inserted SD card is formatted,
all pictures will be deleted.
• Load pictures from card
(max. 28)
Saved pictures are transmitted to the
unit's internal memory.
• Save all pictures on the
SD card
Pictures in the telephone's memory
are saved to the card.
Saved pictures are subject to the
same copyright restrictions as
photographs.