Installation - HYDAC ELECTRONIC HNS 526-2 Notice D'utilisation

HNS 526

4 Installation

To ensure safe operation of the level sensor the following conditions must be met:
■ The sensor must only be used in non-pressurized applications.
■ The sensor must be mounted vertically to the fluid surface.
■ Ensure that no obstacles project into the blind zone.
90°
■ Ensure that there are no components (e.g. threaded connections, hoses, inlet pipes etc.)
inside the ultrasound field.
■ Prevent adhesions (e.g. drops of water, contaminants) from collecting on the sensor
head.
Version: 06.10.2014
Blind zone
Hoses/
pipes
HYDAC ELECTRONIC GMBH
7
E
Part No.: 669869