Directions For Use - MICRO MEGA X-Cid2 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EQUIPMENT
Equip each station with the following parts, depending on the instruments to be treated:
• ISO 3694 coupling (contra-angles and handpieces).
• ISO 9168 MID coupling (turbines) with suitable quick-connector (not supplied, use a connector in accordance with your
turbine).
CONNECTIONS
Compressed air connection (1)
The device is equipped with a quick-connector for Ø 4x6 flexible tubing.
To ensure an airtight connection and avoid leaking, check that the tubing has a clean cut and that the pressure delivered on
the device is between 5 and 8 bars.
Electrical connection (2)
®
Plug in the X-Cid
2 using the power cord provided. Comply with the safety data sheet.
The wall socket must be easily accessible and must be grounded.
Fluid evacuation (3)
The tubing for evacuating waste fluids (Ø 25 ext.) is directly connected to the waste outlet. All components are
biodegradable.
Make sure that the connection is watertight and that the tubing has a sufficient downward slope. Also make sure that the tube
does not form a siphon-like loop that might prevent fluid evacuation.
2

DIRECTIONS FOR USE

1) Make sure that the fluids exceed the minimum required levels.
2) Turn on the device by pressing the 0/1 button. The green "power on" LED will light
up.
3) Open the hinged door of the treatment tank and install the instruments to be treated:
• Insert contra-angles and handpieces completely. You will hear a click. To remove
them, press the button above the coupling and pull the instrument downwards.
• Place turbines on the suitable quick-connect coupling.
4) Close the door.
5) Press buttons 1, 2 and/or 3 to activate the corresponding treatment stations. The
yellow LEDs of the selected stations will blink.
• Caution! Instruments should undergo another complete treatment cycle if
the cycle is voluntarily or involuntarily interrupted in order to ensure an
effective treatment.
Année du marquage CE : 2006
Year of CE-marking: 2006
CE-Kennzeichnung: 2006
3
1
07/13 Ref. 60300544-I
22

Publicité

Table des Matières
loading

Table des Matières