Specific Areas Of Risk; Proper Use; Environmental Conditions - Fronius TIG Grinder Instructions De Service

Specific areas of
risk

Proper use

Environmental
conditions
42
Keep hands, hair, clothing and tools away from moving parts, for example:
- Cogs
- Rollers
- Shafts
- Joints
Do not reach into rotating drive components.
Danger of crushing!
Do not put hands or any other parts of the body between the pressing parts.
Risk of cutting!
Wear safety gloves when handling sharp objects.
Covers and side panels may only be opened/removed while maintenance or
repair work is being carried out.
During operation
- ensure that all covers are closed and all side panels are fitted properly.
- keep all covers and side panels closed.
The device is to be used exclusively for its intended purpose.
Any use above and beyond this purpose is deemed improper. The manufac-
turer shall not be held liable for any damage arising from such usage.
Proper use also includes:
- carefully reading and obeying all the instructions and all the safety and
danger notices in the operating instructions
- performing all stipulated inspection and servicing work
- installation as specified in the operating instructions
Operation or storage of the device outside the stipulated area will be deemed
as not in accordance with the intended purpose. The manufacturer shall not
be held liable for any damage arising from such usage.
Ambient temperature range:
- during operation: + 5 °C to + 40 °C (41 °F to 104 °F)
- during transport and storage: -15 °C to +55 °C (5 °F to 131 °F)
Relative humidity:
- up to 50 % at 40 °C (104 °F)
- up to 80 % at 20 °C (68 °F)
Ambient air: free from dust, acids, corrosive gases and substances, etc.