Technical Data; Specified Conditions Of Use - Güde GTKS 315 / 230 V Traduction Du Mode D'emploi D'origine

Technical Data

Circular table saw .............................................................................GTKS 315/230V .................GTKS 315/400V
Art. No ............................................................................................................................................. 55150 ......................................... 55152
Service connection ............................................................................................230 V/ 50 Hz .............................400 V/ 50 Hz
Rated input .....................................................................................................................2000 W .................................... 2200 kW
Idle speed .................................................................................................................2800 min
Saw blade dia. x hole dia ..........................................................................315 x 30 mm, HM 36 Z ............ 315 x 30 mm, HM 36 Z
Riving knife .....................................................................................................................7,4 mm .......................................7,4 mm
Riving knife guide slot ............................................................................................. 12,6 mm .................................... 12,6 mm
Cutting depth max. 90° ...............................................................................................83 mm ........................................83 mm
Cutting depth max. 45° ...............................................................................................58 mm ........................................58 mm
Weight ..................................................................................................................................46 kg ...........................................46 kg
Table Extension ................................................................................................. 800x400 mm ........................... 800x400 mm
Noise and Vibration Information
Sound pressure level L
1), 2)
pA
Guaranteed sound power level L
Wear ear protectors!
1) Measured according to EN ISO 11202:1995/AC:1997,
under load, Uncertainty K=4 dB (A)
2) The values stated are emission values and as such do not necessarily constitute values which are safe for the
workplace. Al- though there is a correlation between emission levels and environmental impact levels, whether
further precautions are neces- sary cannot be derived from this. Factors influencing the actually present environ-
mental impact level in the workplace include the characteristics of the work area and other noise sources, i.e. the
number of machines and other neighbouring work process- es. The permitted workplace values can likewise vary
from country to country. This information is intended to assist the user in estimating hazards and risks.
The appliance meets EN 61000-3-11 requirements and is subject to special connection conditions. That means
that use on optionally selected connection points is inadmissible. The appliance can lead to occasional voltage
fluctuations under unfavourable power conditions. The appliance is only designated to be used for connection
points not exceeding the maximum allowed impedance of Zmax = 0,233 Ω. As a user, you must make sure your
connection point on which you want to use the appliance meets the above-mentioned requirements – after
agreement with your electricity supplier if necessary.
Read and understand the operating instructions
before using the appliance. Abide by all the safety
measures stated in the service manual. Act responsib-
ly toward third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
The circular saw is only intended to cut wood and
wood like products.
Do not use this product in any other way as stated for
normal use.
Not observing general regulations in force and
instructions from this manual does not make the
manufacturer liable for damages.
.................................................................................................................................................... 93,3 dB (A)
2) ................................................................................................................................... 107 dB (A)
WA
-1
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Because wrong using of the appliance can be risky,
only competent persons are allowed to operated it.
Operator must be trained properly concerning adjust-
ment, operation and appliance using.
Qualification: : Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
Minimum age: : Persons over 18 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training: : Using the appliance only requires corre-
sponding training by a professional or the Operating
ENGLISH
................................2800 min -1
19