Invacare Softform Premier Active 2S Manuel D'utilisation page 18

Invacare® Softform® Premier Active 2S
Heavy soilage
Where the mattress is badly soiled, we recommend cleaning
with a dilute cleaning solution at 80 °C in the washing
machine.
Large spillages of blood should be absorbed and
removed with paper towels first, followed by as
above.
1. Clean up all spillages of bodily fluids i.e. blood, urine,
faeces, sputum, wound exudater and all other bodily
secretions as soon as possible using a 1% Chlorine
Solution (10,000 ppm).
2. Rinse with clean water using a single use nonabrasive
cloth.
3. Dry the cover thoroughly.
IMPORTANT!
Polyurethane coated fabrics can absorb liquids for
short periods causing a temporary change to the
polyurethane characteristics. The mattress cover
swells temporarily and is more vulnerable to
physical damage for a period after it is completely
surface dried, by which time it will revert to its
previous state.
IMPORTANT!
1% Chlorine Solution used on a regular basis can
diminish the life of the cover if not rinsed and
dried properly.
– Do not use granules.
18
WARNING!
– Remove contaminated foams from use.
CAUTION!
– Keep clear of open heat sources.
IMPORTANT!
– Do not use phenols, alcohols, bleaches, or
other abrasive materials.
Replacing covers
1. Unzip the cover and remove it carefully from the foam
core.
2. Place new cover onto the foam core.
3. Then close the zipper.
IMPORTANT!
– Ensure that the corners of the foam core are
positioned correctly into the corners of the
cover.
– Ensure that the profiled side of the foam is
facing uppermost when packed into its cover.
1627426-A